FAQS

MALTS (Motion Activated Laser Targeting System) automatically activates the laser based on weapon position and movement, turning on when aimed downrange and off in high/low ready positions.

• Laser: 520nm wavelength, ≤5.0mW output, Class IIIa, 8,000-hour lifespan
• Physical: 51.3 x 28.2 x 29.8mm, 25g weight
• Battery: 330mAh Li-ion, 3.7V, 2-hour charge time, 300+ cycle life

CTL-200 with MALTS Technology, USB-C Cable, CTL Wrench with 1.5mm Hex Drive, rail adapters, Laser Warning Labels, and CTL Welcome Card.

Compatible with Picatinny and Weaver rail systems using included adapters.

Use included CTL Wrench (1.5mm Allen) to adjust:

• Horizontal: Left (clockwise), Right (counterclockwise)
•  Vertical: Up (counterclockwise), Down (clockwise)

The battery provides several hours of active use and can hold charge for months. Charging takes approximately 2 hours via USB-C. Charging schedules:

• Range use: Daily

• Daily carry: Weekly

• Storage: Monthly

• Red blinking: Low battery
• Green: Charging
• Off while plugged in: Fully charged
• Two quick red flashes: After unplugging the charging cord

• Daily: Check lens/aperture
• Weekly: Clean exterior
• Monthly: Charge if in storage
• Pre-use: Check mounting/alignment
• Post-use: Clean and charge

• ON: When pointed downrange at target
• OFF: In high ready, low ready, Sul position, weapon on its side, after 20 seconds without motion, or in sleep mode

Perform a tap-tap-pause-tap-tap sequence within 1.5 seconds. Wait 3 seconds after last movement before attempting.

• Laser Disabled: Quick flash 4 times

• Laser Enabled: Slow flash 2 times

1. Sleep Mode: Lowest power, no motion for 10+ seconds
2. Active Mode w/ Laser OFF: Monitoring position
3. Active Mode w/ Laser ON: Full power when properly oriented
4. Laser Disabled: Via Double-Double Tap

• Barrel Angle: ±40° from horizontal
• Grip Angle: Laser ON when ±60° or less from horizontal
• Activates when both angles are within range; deactivates outside parameters

• Unload firearm before installation
• Avoid direct eye exposure to Class IIIa laser
• Don’t stare into the beam or use optical devices
• Avoid pointing at reflective surfaces or faces/eyes
• Follow all standard firearm safety practices

• High humidity (>90%)
• Extreme temps (<14°F or >122°F)
• Direct sunlight
• Salt air exposure
• Dust/debris-heavy environments

• Transport: Enable Laser Disabled mode, charge after transport, avoid extreme temperatures, protect from impact/moisture
• Storage: Cool, dry place (23–95°F), 40–75% humidity, monthly charging, Laser Disabled mode, avoid magnetic fields

Covers manufacturing defects and operational failures under normal use. Excludes:

• Normal wear/tear
• Misuse or neglect
• Unauthorized modifications
• Environmental damage
• Battery degradation
• Products not purchased from authorized sellers